LAN & USB

Vendormodel (chip)interfaceTypecompatible
3comGigabit PCI NICPCILAN YES
AtherosAR816x PCILAN YES
AtherosAR817x PCILAN YES
AtherosL1 Gigabit Ethernet PCILAN YES
AtherosL1E Gigabit EthernetPCILAN YES
AtherosL2 Fast EthernetPCILAN YES
BroadcomAll BCM tg3 basedPCILAN YES
BroadcomBCM NetXtreme IIPCI-ELAN 10G YES
Broadcom440x EthernetPCILAN YES
Broadcom47xx EthernetPCILAN YES
RealtekRTL8101PCILAN YES
RealtekRTL8168PCILAN YES
RealtekRTL8168BPCILAN YES
RealtekRTL8168CPCILAN YES
RealtekRTL8168EPCILAN YES
RealtekRTL8169PCILAN YES
RealtekRTL8111PCILAN YES
RealtekRTL8111BPCILAN YES
RealtekRTL8111CPCILAN YES
RealtekRTL8111CPPCILAN YES
RealtekRTL8111D(L)PCILAN YES
RealtekRTL8111DPPCILAN YES
RealtekRTL8111GPCILAN YES
RealtekRTL8111GUSPCILAN YES
RealtekRTL8111EPCILAN YES
RealtekRTL8111FPCILAN YES
RealtekRTL8411
PCILAN YES
RealtekRTL8411B(N)PCILAN YES
RealtekRTL8118ASPCILAN YES
IntelAll e1000-xxxtar.gz - basedPCILAN YES
IntelAll IGB-xxxtar.gz - basedPCILAN YES
Intel8254xPCILAN YES
Intel8256хPCILAN YES
Intel8257xPCILAN YES
Intel82580PCILAN YES
IntelI350xPCILAN YES
IntelI210PCILAN YES
IntelI211PCILAN YES
IntelI217PCILAN YES
IntelI218PCILAN YES
IntelIntel EXPI9301CTBLK (quadro)PCI-ELAN YES
MarvellAll Driver pack basedPCILAN YES
Marvell88E8053PCILAN YES
NVIDIAnForce 10/100/1000PCILAN YES
TP-LINK TG-3468 (Realtek RTL8168)PCI-ELAN YES
D-LINKDUB-E100 10/100USB 2.0LAN NO
BrocadeBrocade 10GPCI-ELAN 10G YES
MellanoxMellanox 10GPCI-ELAN 10G YES
SynologyE10G15-F1 10GPCI-ELAN 10G YES
SynologyE10G15-F1 10GPCI-ELAN 10G YES
BroadcomBCM94360CD
(802.11ac / Apple)
mini-pci-eWLAN
Bluetooth 4.0
NO
BroadcomBCM94360CD
(802.11ac / Apple)
PCI-EWLAN
Bluetooth 4.0
NO
TP-LINKTL-WN821N N300
(2,4 Ghz)
USB 2.0WLAN YES
RalinkRalink 2870USB 2.0WLAN NO
D-LINKDUB-E100 10/100
Fast Ethernet
USB 2.0LAN NO
D-LINKDUO DWA-160 N300
(2,4-5 GHz)
USB 2.0WLAN NO
TP-LINKTP-LINK TL-WDN3200 N600
(2,4-5 GHz)
USB 2.0WLAN NO
MSIMS-3871 (Ralink 2870 )USB 2.0WLAN NO
D-LINKDBT-122USB 1.0Bluetooth 1.2 YES
ASUSWL-BTD202USB 2.0Bluetooth 2.0 YES
no nameCBR SL-30USB 2.0Bluetooth 1.6 YES
AsusPC1EPCI-EUSB 3.0 YES

SATA / SAS / SCSI Adapters

Vendormodel (chip)TypePortscompatible
LSIFusionMPT
(Message Passing Technology)
SAS / SCSI YES
LSIMegaRAIDSATA / SAS / SCSI YES
LSI9201-16iSATA / SAS 6Gb/s 16 YES
LSI9220-8i SATA / SAS 6Gb/s 16 YES
IBMM1015
(cross flashed to 9211-8i IT)
SATA / SAS 6Gb/s 4 YES
JMicronJmb363SATA2 YES
Silicon ImageSil3114SATA 1504 NO
Silicon ImageSiI3512SATA 1502 YES
Silicon ImageSIL3132SATA22 YES
ST LabA-390SATA 1502 YES
ARECA
AllSATA/SAS RAID YES
Promise SuperTrak EX Series

AllSATA/SAS RAID YES
MATCH TECHFG-ES3132-2IRSATA22 YES
PMC-SierraSPC 8001SAS/SATA 1.5G/3G/6G 8 YES
Marvell88SE64XXSATA/SAS YES
Marvell88SE91XXSATA/SAS YES
NO (dsm5.2)
Marvell88SE92ХХSATA/SAS YES
Marvell88SE94XXSATA/SAS YES
Marvell88SE9215SATA4 YES
HYPER DuoFG-EST11B1, E24IRSATA34 YES
Adaptec2405SATA/SAS4 NO
Adaptec5405SATA/SAS4 NO
Adaptec5805SATA/SAS8 NO
Rocket RAID2680SAS4 NO
AsmediaASM-106xSATA/SAS2 YES , NO (dsm5.2)
PromiseFastTrak TX4310SAS4 NO
Adaptec1430SASATA4 NO
PromiseFasttrack TX 8660SATA / SAS PCI Express8 NO

-> HARDWARE SUPPORTED LIST <-

Please let us know in the comments below, about working / not working devices, what would we have added them to the list.

42 thoughts on “Compatible

  1. AT3TB

    Hello

    Controller Adaptec AAR-1430SA 4Port SATA II PCIe 4x

    Is Compatible with NANOBOOT 5.0.4.1 and DSM 5.0-4528
    But it doesn’t work with XPEnoBoot 5.1 -5022.(1-3) -5055

    Reply
    1. AT3TB

      Hello

      Testet with DSM 5.2 Bootloader XPEnoboot 5.2-5565.1
      The AAR-1430SA Controller work fine.

      Reply
  2. Alan

    Is it possible to add USB Dtv support?
    I got the following error while using the stick

    May 24 19:41:38 vDSM5 kernel: [ 1585.871118] firmware 3-1.2: firmware_loading_store: vmap() failed
    May 24 19:41:38 vDSM5 kernel: [ 1585.876969] usb 3-1.2: dvb_usb_v2: Did not find the firmware file ‘dvb-usb-lme2510c-s0194.fw’. Please see linux/Documentatio
    May 24 19:41:38 vDSM5 kernel: [ 1585.876988] dvb_usb_lmedm04: probe of 3-1.2:1.0 failed with error -2
    M

    Thanks alot

    Reply
  3. szegedilaci

    I have an Atheros L1 card and i dont have flash the mac becuz i dont have a firmaware pls help me
    [email protected]

    Reply
  4. BlackPeter

    I got a ODM board with Intel Atom bay-trail E3845 4 core cpu,1x SO-DIMM socket,32 GB eMMC storage connected to the SDIO bus,dual 100/1000 Ethernet & PCI-E x1 slot.
    So here is the problem,in the install procedure,the kernel dos not detected the eMMC storage card. I think it may be a little waste that can’t install the DSM into the eMMC.

    Hope that the eMMC driver could be added to kernel. THS

    Reply
  5. bagziters

    Promise Fasttrack TX 8660 (8-Port SATA / SAS PCI Express Raidcontroller) does not work with xpenology, no detetction of Harddisks, not functionally.

    Reply
  6. benok

    Asmedia ASM1062 controller doesn’t work on XPEnology 5.2.5565.2. (recognized as ahci but not works.)

    But with ESXi6 & RDM it works stable, even with eSATA & external port multiplier case with 8 HDD drives.
    It performs fairly well.

    Reply
  7. kinkids

    SIL3114 PCI raid 4 port not work in DSM5.2, can’t detect when build new DSM5.2 NAS

    Reply
    1. sbv3000

      Try flashing the SIL3114 card to the non-raid/IDE firmware – this seems to work – i have 4 of these cards working ok in various bare metal setups

      Reply
      1. Killersplace

        Hi. I try to Flash my SIL3114 with b5403.bin, all OK there but now Synology DSM 5.2 says its an external SATA Connected but I use the internalport

        can some one point me to the right BIOS file

        Reply
          1. Killersplace

            ok hmmm I luct at the Forums posts but hmmm i am litle noob on compaling/editing inportant files
            i can even find the synoinfo.conf files LOL

            sorry for my bad english

  8. Jae-Hoon,Choi

    How can I works with Brocade BR-1020 (QLogic BR-1020 now)?
    You mention that Brocade 10G is compatible.
    If there is something to work another configuration?

    Reply
    1. sirius

      Don’t say that 😛
      I’m planning to buy ASRock’s C2550D4I and I need it working !
      Somebody fix this before I buy this board !

      Reply
      1. Murphy

        xpenology works great on this asrock mainboard (a friend is using this model with xpenology 5.2). Also on my own ASRock C2750D4I mainboard.

        Just 1 little issue: 2 sata ports are not working yet, but the other 10 sata ports are working great.

        The ASRock C2750D4I mainboard is one of the finest mainboards for xpenology !!!!!!!

        Reply
      2. Murphy

        Xpenology works great on a Asrock C2550D4I mainboard !
        10 of 12 sata ports are working great, xpenology 5.2 latest update.

        Reply
        1. JimyRyan

          Hello,

          I have the Asrock C2750D4I mainboard with xpenology 5.2 (build 5644.4) but I need to put the 4 sata2 ports in IDE mode. Otherwise, during the boot, my system stuck on “=trigger device plug event=”.

          On the BIOS I do this settings : “Intel RC Setup -> South Bridge Chipset Configuration -> SATA Configuration -> SATA Mode Selection = IDE”

          My question : how you got 10 ports working ? I got only 8

          Reply
  9. sbv3000

    enable telnet/ssh service
    download/install winscp
    connect to NAS with winscp using user=’root’ and the password= ‘the one set for administrator’
    in the winscp browser window you can see system files in /etc and /etc.default

    Reply
  10. Branox

    I need firmware for flash MAC of my onboard Intel LAN in Gigabyte H97N-WIFI, if someone help me, i will pay him…
    [email protected]

    Reply
  11. weepe

    I just to want inform that ASMEDIA asm 1061 PCI-E to SATA 3 host adapter is working fine with my system. Though, someone claim that asm1062 is not working with DSM 5.2.

    Reply
  12. Roman

    Hello, LSI (Avago) MegaRaid 9341-4i is not capability with XPEnoboot 5.2-5592 (((((

    Reply
  13. Marco

    I’d like to add that the HP Microserver (old version, the N40L/N54L) works straight out of the box, and now I kinda love you guys 😀

    Reply
    1. Antecmaster

      Hi!
      Also Hp prolant micro server G8 version, works straight out of the box too !!
      With more Power and more memory !

      Reply
    2. Antecmaster

      Hi!
      Also Hp prolant micro server G8 version, works straight out of the box too !! love this
      With more Power and more memory !

      Reply
  14. Drake66

    Installed DSM 5.2-5592 DS3615xs with XPEnoboot 5.2-5592.2 DS3615xs on an Lenovo T510 with Samsung EVO 840 ssd. Booting from Corsair Voyager GT 64GB stick.
    Everything is green and I haven’t found any errors at all.
    Flashing new MAC on the Intel NIC was also a success.

    Reply
  15. semwan

    I have one BIOSTAR NH3 mainboard, and using 5.2-5592.2 to boot, but it report etho not working, NH3 have one RTL8111G LAN. How could i fix this?

    Reply
  16. loeufdur

    hi!

    Areca arc-1260 on asus p5q and XPEnoboot DS3615xs 5.2-5592.2 with dms update 4, only pass througt mode working. Don’t reconize raid or jbob mode (no disk view on dms)

    Reply
  17. loeufdur

    Sorry after more tryings, finaly Areca arc-1260 works perfectly. volumes are mounted as hdds on xpenology

    Reply
  18. Gg

    Hello, i’ve a motherboard : MSI k8n neo4 platinium,
    What is the right version, and is it compatible ?

    Reply
    1. Gg

      It worked with the motherboard k8n neo4platiunium :

      DSM 5.2-5592 Update-3

      with XPEnoboot DS3615xs 5.2-5592.2

      Thanx to the team of xpenology !

      Reply
  19. ddarkernb

    Testet with DSM 5.2 Bootloader XPEnoBoot 5.2-5592.2
    The ST-Lab A520 (Marvell 88SE9230) 4 SATA 6G Controller work fine.

    Reply
  20. Zac

    The information states that the Brocade 1020 card is compatible; however, after the installation of XPEnoboot_DS3615xs_5.2-5644.4, the 1020 card does not show up as an available Ethernet interface as shown with the “ipconfig -a”. The card is installed in a Dell C6100. I don’t see the card listed in the Web Interface Network section. Can you assist me ?

    Reply
  21. Martin

    Hello,
    I have DSM 5.2-5592 with XPEnoboot_DS3615xs_5.2-5592 running and just wanted more Ethernet-Ports to “bond” them, for more speed. So I installed this Network-Card:

    HP NC380T Dual Gigabit Server Netzwerkkarte 10/100/1000 Mbit/s PCI-E 374443-001

    But it not recognized. Maybe its a very special one?

    By the way…. GREAT WORK DUDES!!!!!

    Reply
  22. Unknown

    Hallo,

    Mein Hp Ex490 ist scheinbar nicht kompatibel. 100mbit sind bisher maximal, dabei sollte gigabit möglich sein.

    Reply
  23. feral

    Running Nanoboot with DS3612xs pat file on a Fujitsu FDMA-1 which has an Aopen i965gmx-hg AIO motherboard, single sata drive booting from USB.

    Reply
  24. Corné Muijlwijk

    I have a DeLock Controller Sata 4 port with Raid but i think the Xpenology machine doesn’t recognise my drives. It stays ‘initializing’. Do i have to configure a raid in the bios setup or is that not nessacery?

    Reply
  25. aalozano

    Sorry to ask, but is the download site up and running. I get no response on download of vmdk any version.

    Thanks

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *